3M Fire Barrier Rated Foam FIP 1-Step

3M Fire Barrier Rated Firestop Foam FIP 1-Step

Fire stop foam being appliec to conduits

3M Fire Barrier Rated Foam FIP 1-Step

Firestop intumescent foam used to fill the annular space created by pipes and cables penetrating through fire-rated construction. No mineral wool backing required, so 3M Fip 1-step firestop foam installation is up to three times faster. Not runny, won’t run or sag in horizontal or vertical applications – consistent expansion rate. 3M FIP 1-Step Fire Barrier Rated Foam is similar to 2-step epoxy sealants, but with only 1 step.

Categories: 3M, Firestop Tag: 3M

Product Description

3M Fire Barrier Rated Foam FIP 1-Step Firestop foam tested up to 2 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115
Meets the International Building Code for Passive Fire Protection
Expands up to 5X when dispensed. One cartridge FIP 1-Step equals up to 6 tubes 10.1 oz caulk
Intumescent. Expands in a fire
Expansive UL systems for blank openings, metal pipe, cables, cable trays, combos, insulated pipe
UL systems require no mineral wool
Remains pliable after installation for easy installation of new cables/conduit in existing opening
Excellent adhesion. Can be installed in wall or floor applications with no backing material
Quick cure. Full expansion after approximately 2 minutes
Paintable with primer
STC rating of 57 when tested in STC 57 rated wall assembly
Air leakage less than 1 CFM/Sq Ft
Meets the intent of LEED VOC regulations.