FIBROUS ADHESIVE CP-97 is used to bond dense thermal insulations such as calcium silicate and expanded perlite to itself and to non-porous surfaces. Primed or painted metal surfaces should be tested for compatibility with FIBROUS ADHESIVE CP-97 prior to use. It will also effectively adhere other ‘hard to hold’ materials. Because of its sodium silicate base, this product is not recommended for use with glass fiber or other alkali sensitive insulations.
- FIBROUS ADHESIVE CP-97 actually gets stronger as it ages to form a tight bond.
- Excellent coverage is obtained, and it is an economical material to use.
- Clean up is fast and easy.
- Meets requirements for LEED 2009 IEQ 4.1 Low-Emitting Materials, Adhesives and Sealants. VOC: 0 g/l, less water and exempt solvents.
WET WEIGHT (ASTM D1475)
12.5 lbs./U.S. gal. (1.5 kg/liter)
AVERAGE NON-VOLATILE (ASTM D2369)
59% by weight
SERVICE TEMPERATURE RANGE
Temperature to which dry film is subjected.
40ºF to 850ºF (4ºC to 454ºC)
APPLICATION TEMPERATURE RANGE
Temperature of product when applied.
40°F to 100°F (4°C to 38°C)
0 – 5 Minutes
Bonding and drying time will vary depending upon applied thickness, temperature and humidity.
Varies with substrate and membrane.
2.5 – 3.0 U.S. gal./100 sq. ft. (1.0 – 1.2 l/m2)
Warm, soapy water
General Insulation Company Inc. is an insulation supplier / insulation distributor that stocks and fabricates a wide variety of industrial and commercial air barrier, vapor barrier, moisture and water barrier products for the construction market.