Perm-A-Barrier VPL Low Temperature (LT) Membrane

Perm-A-Barrier VPL Low Temperature (LT) Membrane

Perm-A-Barrier VPL Low Temp (LT) is a fluid-applied, vapor-permeable air barrier membrane for low temperature applications. Perm-A-Barrier VPL Low Temp (LT) is a two-component, acrylic membrane that cures to form a resilient, monolithic, fully-bonded elastomeric sheet when applied to construction surfaces at temperatures between 20 °F (-7°C) and rising to 60 °F (16°C).

Get More Info

Product Description

Perm-A-Barrier VPL LT membrane provides superior protection against the damaging effects of air and liquid water ingress on building structures. The product creates a solid barrier against air infiltration and exfiltration, which minimizes associated energy loss and condensation problems.

Perm-A-Barrier VPL LT membrane is vapor permeable for wall assemblies requiring this “breathable” characteristic. As a vapor permeable membrane, this product permits the transfusion of water vapor that may otherwise condense in the wall structure; but is impermeable to liquid water, which allows the material to act as a water drainage plane.

Product Advantages

  • Fire resistant – meets NFPA 285 as part of various wall assemblies with foam plastic insulation
  • Plasticizer, Phthalate and Halogen-free – safe and environmentally-friendly
  • Air tight – protects against air passage and associated energy losses. Meets new ASTM E2357 standard as required by IECC 2012
  • Vapor permeable – prevents moisture from being trapped in the wall cavity by allowing walls the ability to dry
  • Low Temperature – can be applied at temperatures as lo as 20°F (-7°C)
  • Fully bonded – transmits wind loads directly to the substrate
  • Seamless – continuous membrane integrity with no laps
  • Damp surface tolerant – can be applied to damp-to-touch surfaces
  • Strong adhesion to common construction substrates such as wood, block, concrete, OSB, gypsum sheathing and metal
  • Compatible with Perm-A-Barrier® Flashing Systems

Principal Applications
Vapor permeable air barrier for new and remedial commercial and residential applications where application temperatures are between 20 °F (-7 °C) and 60 °F (16 °C):

  • Concrete block walls with brick veneer or pre-formed cladding panels
  • Steel or wood stud walls with exterior gypsum sheathing, brick veneer or pre-formed panels, plywood and OSB

Get More Info

General Insulation Company Inc. is an insulation supplier / insulation distributor that stocks and fabricates a wide variety of industrial and commercial air barrier, vapor barrier, moisture and water barrier products for the construction market.

Perm-A-Barrier VPL Low Temp TDS

Perm-A-Barrier VPL Low Temp SDS (Part A)

Perm-A-Barrier VPL Low Temp SDS (Part B)

General Insulation – Perm-A-Barrier VPL Low Temperature (LT) Application – Part 1