Product Description
PRIMARY USES
For use in new and existing buildings, complying with the IBC®, IRC® IEBC® and other applicable codes or standards, Plus Spray Seal™ is utilized in applications where it provides:
• Surface Burning Characteristics
• Interior Finish Classification Class I or Class A:
o Flame Spread (FS) 0-5
o Smoke Development (SD) 0-35
• Alternative or Non-prescriptive Thermal Barrier Protection
• Fire Resistance
• Air & Water-Resistive Barrier
• Vapor Semi-permeable
• UV & Weather Durability
SPECIFICATIONS
Color: Light Gray/Tinted
Finish: Flat
VOC Content: 18 g/L EPA Method 24
Dry Time: 60-90 Minutes
Pails: 5 Gallons (19 L), 55 lbs.
Drums: 55 Gallons (208 L), 605 lbs.
Shelf Life: 24 Months
Cure Time: 24 Hours
Boiling Point: 212°F
Freezing Point: 32°F
% Volatile by Volume: 38%
Specific Gravity: 1.25
APPLICABLE STANDARDS
No-Burn Plus Spray Seal may be specified in compliance of the following:
AC14 ASTM G154
AC257 CAN/ULC-S102
AC377 CARB
ANSI/ASHRAE/ICC/USGBC Standard 189.1 CDPH (CA Spec 01350)
ANSI/NSF 51 CHPS
ASTM A653 CSFM: 2280-2014:0100
ASTM D2915 EC017
ASTM D5055 GSA PBS-P100
ASTM E84 ICC/ASHRAE 700 NGBS
ASTM E84, 30 min IgCC
ASTM E96 LEED v3 2009
ASTM E119 LEED v4
ASTM E331 NFPA 255
ASTM E1623 NFPA 286
ASTM E2178 SCAQMD Rule 1113
ASTM E2768 UL 723
ASTM G85 UL 1715
General Insulation Company is a B2B distributor – supplier with over 50 locations across the U.S. that stocks a wide variety of intumescent coatings for commercial, industrial, and residential construction markets.
