Product Description
APPLICATION
Manson Insulation fiberglass pipe insulation is intended as a thermal insulation for hot and cold service piping. Typical uses include domestic hot and cold water, hot water heating, high temperature, dual temperature, steam, condensate and refrigerated lines. As a component of a suitable insulation system, plain ALLEY-K Pipe Insulation may be used for light industrial applications, while ALLEY-K with ASJ jacket may be used for commercial and institutional usage.
SUSTAINABILITY
Manson Insulation products with ECOSE Technology are made using our patented, bio-based binder – a smarter alternative to the phenol/formaldehyde (PF) binder traditionally used in fiberglass products. The bio-based binder holds our product together and gives the product its unique appearance.
All of our products are formaldehyde-free and made from sustainable resources , such as recycled glass and sand. And we’re proud to be putting glass bottles back to work rather than into landfills. Our products are made with a minimum of 50% recycled glass—totaling an average of 26 million bottles each month.
INDOOR AIR QUALITY
- UL Environment
- GREENGUARD Certified
- GREENGUARD Gold Certified
- Validated to be Formaldehyde-Free
- Does not contain polybrominated diphenyl ethers (PBDE) such as Penta-BDE, Octa-BDE, or Deca-BDE
- IgCC Section 806.6 Compliant
- EUCEB certified
SPECIFICATION COMPLIANCE
- ASTM C547; Type I, Type IV
- ASTM C585
- MIL-DTL-32585; Type I, Form 4, Facing A and D
- UL/ULC Classified
- USCG 164.109/A4/0
- ASTM C795
- MIL-I-24244
- NRC Reg. Guide 1.36
(Certification needs to be specified at the time of the order)
Jacketing
- L 723/ASTM E84
- CGSB 51-GP-52M
- ASTM C1136; Type I, II
- NFPA 90A and 90B
PRODUCT CHARACTERISTICS
- Greenguard Certification
– Greenguard GOLD certified for superior indoor air
quality performance
– Over 50% post-consumer recycled glass - EUCEB
This product is tested and certified to meet EUCEB requirements.
TECHNICAL DATA
Property Test Performance
Corrosiveness ASTM C665 Does not accelerate corrosion of steel
Corrosion ASTM C1617 Pass
Linear Shrinkage ASTM C356 Less than 0.3%
Maximum Service Temperature C411 1000° F (538° C)
Water Vapor Sorption (by weight) ASTM C1104 Less than 5%
Water Vapor Permeance ASTM E96 0.02 perms
Puncture Resistance TAPPI T803, Beach Units Min. rating of 50
Microbial Growth ASTM C1338 Pass
Surface Burning Characteristics ASTM E84, UL 723, CAN/ULC S102 UL/ULC Classified FHC 25/50
(flame spread/smoke developed)
General Insulation Company is a B2B distributor – supplier with over 50 locations across the U.S. that stocks and fabricates a wide variety of mechanical fiberglass pipe insulation products for commercial, industrial, and residential construction markets.